Key features of the 4440 IC
It is a popular IC among audio enthusiasts and professionals for crisp, clear, powerful sound output and it's user-friendly pin configuration.Output Power
⇒Dual-channel (stereo)amplifier: Output-12w(6wx2)
⇒Bridge-tied load (BTL) configuration: Output-19w
Protection
⇒Thermal protection
⇒Pin-to-pin short protector
⇒Overvoltage, surge voltage protector
Operating Characteristics
⇒Low distortion
⇒Good ripple rejection : 46dB
⇒Good channel separation.
⇒Small residual noise (Rg=0).
⇒Audio muting function.
⇒Small pop sound at the time of power supply ON/OFF
Operating voltage
⇒12V to 18V DC
Pin Configuration of LA4440/CD4440
Components Required for 4440 Stereo Amplifier Circuit
Electrolytic Capacitors
⇒1000uμF/25v-2 pcs
⇒220μF/25v 2 pcs
⇒100μF/25v-5 pcs
⇒4.7μF25v-2 pcs
Ceramic Disk
⇒0.1uf(104)-2 pcs
Resistors
⇒2.2KΩ-2 pcs
Complete Circuit Diagram for 4440 Stereo Amplifier Circuit
⇒Above circuit diagram of IC 4440 is a 6w+6w stereo amplifier.
⇒Left & Right channel audio input is connected to pin 2 & 6 of IC respectively.
⇒Left & Right channel audio output is connected to pin 12 & 10 of IC respectively.
⇒+12V power supply is connected to pin 11 of IC
Click on the Download buttons to download the Circuit Diagram for 4440 Stereo Amplifier Circuit
👉Click Here Other Amplifier Project
Step by step video tutorial of 4440 Stereo Amplifier Circuit
Complete setup of 4440 Stereo Amplifier Circuit
For Adjust volume Connect a 10kΩ potentiometer for each channel (left and right) to control the volume. Connect one end to the input signal, the other end to ground, and the wiper to the Audio input of the Circuit.
Connect the stereo input jack to the input stage of the circuit and Connect the output pin to the speakers.Attach a heat sinks to CD4440 IC to dissipate heat.Gradually power up the circuit and ensure both channels amplify the audio correctly.
Frequently Asked Questions
What is the input voltage range recommended for the CD4440 IC?
The CD4440 IC operates within a voltage range of 12-18V DC.
What is Output Power of the CD4440 IC?
For a stereo configuration the Output power is 12w(6wx2) usually 6W per channels and Bridge-tied load (BTL) configuration Output power is 19W.
Happy building!